to Contact Us page
580 Carnegie Street * Manteca, CA 95337
Phone: 209.239.9191 * Fax: 209.239.5114
Email: info@motorguard.com
BACK-UP PADS

  • Precision Balanced, Vibration Free
  • Heavy Duty Riveted Hubs

    Motor Guard Corporation is pleased to introduce a full line of Back-up Pad Products for automotive refinishing. Two sizes of molded urethane pads are offered in a variety of hardnesses and facings.These pads feature heavy-duty riveted hubs and are precision balanced for vibration free, flawless sanding. A soft, foam Interface Pad can be added to the 6" Back-up Pad for fine finish sanding and for full contact on irregular surfaces.Other accessories include a stiff, reinforced composite Backing Plate for aggressive sanding and grinding.Completing the line is a versitile Buffing Pad Holder for both lambswool bonnets and foam polishing pads.A hook facing provides a slip-free hold while allowingfor quick change of pads.

    Exclusive Features:

    • Full Product Line to Meet All Your Shop Needs
    • Highest Quality U.S. Manufactured Products
    • Precision Controlled Weight and Balance for Vibration Free Operation
    • Ultra Flat Faces for Flawless Sanding
    • Innovative Facing Materials Provide Maximum Hold While Allowing for Quick Change of Abrasive Discs

    SELECTION CHART
    MODEL DESCRIPTION PURPOSE SPECS
    BP-1016 Medium back-up pad
    6" face diameter
    Regular profile
    PSA Face    		 Medium edge pad for PSA backed discs. Firm enough for flat surfaces yet soft enough for curved surfaces. Diameter: 6"
    Face: Vinyl
    Hardness: Medium
    Thread: 5/16-24 Male
    Max. RPM: 10,000
    BP-1116 Firm back-up pad
    6" face diameter
    Low profile
    PSA Face    		 Firm, low profile pad for PSA backed discs. Provides maximum flatness. Diameter: 6"
    Face: Vinyl
    Hardness: Firm
    Thread: 5/16-24 Male
    Max. RPM: 10,000
    BP-1026 Medium back-up pad
    6" face diameter
    Regular profile
    Hook Face    		 Medium edge pad for loop back discs. Firm enough for flat surfaces yet soft enough for curved surfaces. Diameter: 6"
    Face: Hook
    Hardness: Medium
    Thread: 5/16-24 Male
    Max. RPM: 10,000
    BP-1126 Firm back-up pad
    6" face diameter
    Low profile
    Hook Face    		 Firm, low profile pad for loop backed discs. Provides maximum flatness. Diameter: 6"
    Face: Hook
    Hardness: Firm
    Thread: 5/16-24 Male
    Max. RPM: 10,000
    BP-4005 Backing plate
    Regular profile    		 Reinforced composite plate provides a strong, stiff backing for aggressive sanding and grinding. Diameter: 5"
    Thickness: .064"
    Center Hole" 7/8"
    Max. RPM: 10,000
    BP-1018 8" Back-up pad
    Regular profile    		 Large diameter medium edge pad for PSA backed discs. Firm enough for flat surfaces yet soft enought for curved surfaces. Diameter: 8"
    Face: Vinyl
    Hardness: Medium
    Thread: 5/8-11 Female
    BP-2027 7" Buffing pad
    Holder    		 Buffing and polishing pad holder for lambswool bonnets and foam polishing pads. Diameter: 7"
    Face: Hook
    Thread: 5/8-11 Female
    Max. RPM: 2,000
    BP-3026 6" Foam interface pad
    Hook front
    Loop back    		 Soft foam interface pad for use on 6" hook faced discs. For fine finish sanding and full contact on irregular surfaces. Diameter: 6"
    Face: Hook/Loop
    Hardness: Soft
    SANDING GUIDE
    HARDNESS APPLICATION
    FIRM
    		 Firm Pads are designed for use on Flat Surfaces and with Abrasive Grits of 100 or Lower
    MEDIUM
    		 Medium Pads are designed for use on Flat or Curved Surfaces and with Abrasive Grits from 120 to 240
    SOFT
    		 Soft Pads are for designed use on Curved or Irregular Surfaces for Fine Finish Sanding with Abrasive Grits of 240 and Higher